Paper No.   Paper Title.

P_1001 Investigations into the effects of the switch jitter on the operating performance of LTD
P_1003 Amplification and nonlinear compression of ultrashort microwave pulses by quasi-stationary electron beams: theory and experiment
P_1005 The performance of multigap gas switch for fast LTD depending on the isolation between the switch and trigger pulse generator
P_1006 The Pulsed Bumper Power Supply Design for TPS Synchrotron Light Source
P_1007 Solid State Transmitter for a 2 MW Klystron
P_1008 Circuit Breakers for Medium Voltage DC Shipboard Power
P_1009 Benchmarks of a new matlab x-ray FEL simulation Program with GENESIS
P_1010 Simulation Analysis of Transmission-Line Impedance Transformers for Petawatt-Class Pulsed Power Accelerators
P_1011 Time Jitter of Gas-Discharge Closing Switches. A Review
P_1012 Experimental Investigation of Energy Losses in Reverse Switching Dynistors
P_1013 SOS-based solid-state generators operating at pulse repetition frequency up to 20 kHZ
P_1014 PLASMA compression effect IN AN ION DIODE WITH passive anode
P_1015 Investigations of laser radiation dynamics in semiconductors due to picosecond electron beams and electric field pulses
P_1016 Injection criteria and energy characteristics of runaway electron beam accelerated with a nonuniform field in atmospheric gap
P_1017 Compact high-current e-beam diode
P_1018 TEST OF PFN MARX PULSE GENERATOR FOR RKA
P_1019 TEST OF MODULATOR FOR PLS-II LINAC
P_1020 The Design Project of the Pulse Generator Based on an
Inductive Storage and a Combination of Vacuum Interrupter and Plasma
Opening Switch
P_1021 Modular, ultra-compact Marx generators for repetitive
high-power microwave systems
P_1022 Two-Dimensional Numerical Studies of Ablated-Plasma
Dynamics of Wire-Array Z-pinches
P_1023 Behavior of a Spark Gap Pulser at High Repetition Rate
P_1024 Analysis of a Spark Gap Design for High Voltage Pulse
Generator
P_1025 TRANSMISSION EFFICIENCY OF AN ELECTROMAGNETIC PULSE IN
THE VACUUM CONCENTRATOR OF ANGARA-5-1 INSTALLATION
P_1026 Development of an Electro-Optic Kerr Effect Sensor for
Underwater Studies of Intense Transient Electric Fields
P_1027 Multi-arc source of intense large area microsecond
electron beams
P_1028 Study of repetition-rate laser triggered gas switch
P_1029 Increasing corrosion resistance of stainless steel
operating in chlorine-containing atmosphere.
P_1030 Overvolted breakdown and recovery of short nitrogen spark
gaps
P_1031 PRODUCING BIOACTIVE COATINGS ON STEEL AND TI SUBSTRATES
FROM ABLATION PLASMA
P_1032 High-voltage pulsed-power generator for driving high
impedance loads
P_1033 Origin and development of surface waviness due to intense
pulsed electron beam treatment
P_1034 Progress in High Power-Particle Beams and Pulsed Power
Applications at Karlsruhe Institute of Technonoly
P_1035 The influence of laser energy on initiated mode to angled
insulator
P_1036 High voltage multi-pulse generation by pulse circular
transmission
P_1037 Pulsed Power and Pulsed Beam Development in India ??An
Update
P_1038 Plasma expansion and impedance collapse in a foil-less
diode for a klystron-like relativistic backward wave oscillator
P_1039 European Laboratory for Pulsed Power Research (EPPL)
P_1040 Development of the Prototype Module of the 6MV/10MA
Z-pinch Primary Test Stand
P_1041 Experimental and Numerical Study of 6H-SiC
Photoconductive Semiconductor Switch
P_1042 A 150kV-10A Marx generator based on solid-state switches
P_1043 Life testing and damage comparing of GaAs PCSSs with
different illuminating fashions of triggerring Laser
P_1044 Space charge depolarization simulation of low-density
polyethylene aged under DC high voltage
P_1045 Experiments of the Time-Resolved Beam Energy Spectrum
Measurement for DRAGON-I
P_1046 Application of the coaxial vacuum line to forming of
diploid bremsstrahlung beams.
P_1047 Physical and Experiment Study on Semiconductor Opening
Switches at Lower current density Pumping
P_1048 Powerful planar gyrotron with transverse extraction of
electromagnetic energy
P_1049 Experimental Studies on a Coaxial Vircator operating in
TE11 mode
P_1050 Study of electrical explosion of wire method for the
production of nanopowder
P_1051 A repetitive Tesla-charged PFL pulsed power generator
P_1052 Formers of high-voltage subnanosecond pulses based on
compression energy schemes with capacitor storage and sparks dischargers.
P_1053 An autonomous, very compact pulsed power device based on
a synchronized spark gaps arrangement and an innovating resonant
transformer
P_1054 Obtaining GW x-ray radiation source with the EEHG scheme
P_1055 An Improved Coaxial High-Voltage Vacuum Insulator Applied
in TPG700
P_1056 FAST MARX GENERATOR FOR DIRECTLY DRIVING VIRTUAL CATHODE
OSCILLATOR
P_1057 Distribution of conducting and nonconducting matter in
the discharge channel upon wire explosion
P_1058 REPETITIVE SOS-BASED GENERATOR FOR TECHNOLOGICAL
APPLICATIONS
P_1059 A6 Magnetrons Driven by a Transparent Cathode: Recent
Results from Experiments and PIC Simulations
P_1060 Preliminary Study of Beam Parameter Requirements for a
Proton Dielectric Wall Cancer Therapy Accelerator*
P_1061 Particle-In-Cell Simulations of a Virtual Cathode
Oscillator with Feedback Mechanism
P_1062 A new type of bipolar pulse generator
P_1063 Development of high voltage sub nanosecond gas switch
P_1064 Recent Advance in long-pulse HPM sources with repetitive
operation in S, C and X band
P_1065 IMPLOSION OF CONICAL AND QUAZI-SPHERICAL WIRE LINERS AT
THE ANGARA-5-1 FACILITY
P_1066 A NOVEL TECHNIQUE FOR FREQUENCY TUNING FERRITE FILLED
NONLINEAR TRANSMISSION LINES
P_1067 A Study for Feasible Production of Deuteriated Titanium
Film by Using Dense Plasma Focus
P_1068 Flexible Control of Pulsed Power using FPGA and PC
P_1069 Performance Comparison of Semi-Insulating SiC Materials
for Photoconductive Switches
P_1070 Progress on Plasma-Driven Hypervelocity Railguns
P_1071 Hydrodynamic Response of Converter Target Impacted by
High-Current Relativistic Electron Beam
P_1072 X-Pinch-Based Neutron Source
P_1073 A time-resolved spectroscopic diagnostic for imploding
wire array
P_1074 Characteristics of High Current Switching of Shaped
Charge Closing Switches
P_1076 Development of Power Supply System employed Flux
Compression Generator for Driving a High Impedance Load
P_1077 1.2MV Pulsed power transformer electric-field
distribution experimental research
P_1078 HIGH CURRENT, HIGH VOLTAGE SOLID STATE CLOSING SWITCH FOR
PULSE MODULATORS
P_1080 High Power Microwave Generation from a Reflex Triode
Virtual Cathode Oscillator
P_1081 Improved Methodology for Calculation of High Power
Microwave System Efficiencies
P_1082 The Practical Application of Magnetic Pulse Compressors
(MPC)
P_1083 PLASMACHEMICAL SYNTHESIS OF COMPOSITE NANODISPERSED OXIDES
P_1084 Energy Saving Using IGBT
P_1085 Influence of nitrogen pressure on growth of aluminum
nitride thin films by pulse laser deposition
P_1086 On the Relaxation of E-Beam under Weak Beam-Plasma Coupling
P_1087 Influence of Dissipation on Weak Beam-Plasma Interaction
P_1088 Study of a Magnetic Switch for SG-III Energy Module
P_1089 Long gap discharge in water
P_1090 Arc extinguishing characteristics by self-generation
magnetic field on triggered vacuum gap with dual trigger electrodes
P_1091 Results of Compact High Voltage Pulse Transformer made
using a capacitor bank assembled in the shape of primary
P_1092 Study of increase in time-constant of self-integrating
Rogowski Coils by multilayered coil-winding for low-frequency current
measurement
P_1093 A Study of the Effect of Residual Gas Pressure on
Production of Microwave in Virtual Cathode Oscillator
P_1094 Development of 150 kJ Compact Pulsed Power System for ETC
accelerator
P_1095 Microwave radiations from an Axial Vircator driven by
compact and portable pulse power source
P_1097 The physics of beam transport in high power electron beam
diodes*
P_1098 AN INVESTIGATION ON A FAST HIGH VOLTAGE GAS-INSULATOR
SWITCH PERFORMANCE
P_1099 Degradation of Rhodanmine-B by High-Voltage Pulsed
Dielectric Barrier Discharge in Water-Gas Medium
P_1100 4-stage compact repetitive LTD system
P_1101 Experimental and Computational Investigation of
Monolithic Armature with Different Arm Length
P_1102 Effects of armature?셲 structure and material on initial
contact interfacial conditions
P_1103 A cascade backward-wave amplifier driven by relativistic
electron beam
P_1104 Development of High Power Accelerator for Environmental
Application
P_1105 Application of high power electron accelerator for
textile dyeing wastewater treatment
P_1106 E-Beam Flue Gas Treatment Plant for ?쏶viloza Power
Station?쒪D
P_1107 A Shock Wave Driven Pulsed Power Supplies, Utilizing
Materials with Conductivity Transition.
P_1108 Effect of the pulse transformer charging time on the
output voltage of intense electron-beam accelerator
P_1109 Examination of opening switch using relay with
self-current-detection feature
P_1110 Simulation of electric field distribution in multigap gas
switches
P_1111 Breakdown Characteristics between Rod Gaps of Air
P_1112 Extreme states of matter in laser and particle beams
P_1113 Thickness effects of the metallic foil and insulator of
an electromagnetic cylindrical shock wave transducer employed in
extracorporeal shock wave therapy
P_1114 Numerical Study of Slow-Wave Instabilities in Oversized
Coaxial Slow-Wave Structure
P_1115 Plasma chemical synthesis of a nanodisperse titanium
dioxide under the influence of a pulsed electron beam
P_1116 Experimental Study on Weakly Relativistic Oversized
Backward Wave Oscillator with Coaxial Rectangular Corrugations
P_1117 rep-rate operation of multi gap gas switch for fast
linear transformer driver
P_1118 Emission characteristic of high energy pulsed ion beam
produced in dense plasma focus device
P_1119 Experimental Comparison and Study on the Performance of
Pulse Thyristor and Gate-turn-off Thyristor for Pulsed Power Applications
P_1120 Generator of nanosecond pulses based on inductive storage
of solid conductor.
P_1121 Design and modeling of capacitor bank power supply for
its fast charging
P_1122 Effect of annealing temperature on the pollycrystalline
lead oxide film derived by sedimentation method
P_1123 OUTPUT CHARACTERISTICS OF THE HIGH POWER MICROWAVE
GENERATED FROM AN AXIAL AND TRIODE VIRTUAL CATHODE OSCILLATOR
P_1124 The Capillary Discharge X-ray Laser Pulse Power Supply
Design
P_1125 1 MA-LTD stage
P_1126 Compact 350 kV Tesla based pulsed transformer with
waterline for electron beam generation
P_1127 Electrode erosion from high current moving arcs
P_1128 Vulnerability test with 2.4ns rise time, 300kV, ~500MW
compact coaxial Marx generator
P_1129 HV Impulse Generator Using Ferroelectric Materials
P_1130 Over-Voltage Trigger Device for Marx Generators
P_1131 Measurement of the Heat Transfer from a Spark Gap
Electrode Through its Connecting Rod
P_1132 Recent Research Activities on Proton Acceleration Driven
by Ultrashort Ultraintense Laser System at APRI
P_1133 Dynamic Analysis of Fast Electrodynamic (Thompson) Drive
Mechanism
P_1135 Impact of Metal Thickness and Field-shaper on the
Time-variant Processes During Impulse Electromagnetic Forming in Tubular
Geometries
P_1136 Diagnostic equipment of a TEMP-4M generator of high
current pulsed ion beams
P_1137 Multiple Continuous Pulsed Magnetic Traveling Wave
Propulsion Based on Interlaced Coil Layout
P_1138 Conceptual design of a 1000-TW pulsed-power accelerator
P_1139 Measurement of extreme ultraviolet (EUV) intensity of
coaxial focused plasma in accordance with the pressure of Argon and
Ne-Xe(30%) for EUV light source
P_1140 Plasma density structure effect on the electron energy in
laser wakefield acceleration
P_1141 Research on the Working Gas Pressure of Spark Gap Switch
in High Power Laser System
P_1142 30W Fiber Coupled Laser Diode Optical Module for Medical
Applications
P_1143 Particle-in-Cell simulations of laser guiding in a plasma
channel and capillary discharge
P_1144 Horn array antenna with spilt waveguide
P_1145 Calculations and Tests of Instantaneous Junction
Temperature of High Power Thyristors
P_1146 Analysis and design of switched low-impedance
transmission line oscillators for high power wideband pulse radiators
P_1147 Simulation Study on High-Quality Proton Generation from
Thin Targets Driven by Intense Short Pulse Lasers
P_1148 A klystron-like relativistic backward wave oscillator
P_1149 High-resolution X-ray imaging based on pixel-structured
CsI:Tl scintillating screens for indirect X-ray image sensors
P_1150 High frequency Doppler ultrasound transducer for the
peripheral circulatory system
P_1151 Electron accelerator for pumping of the Xe2 lamp
P_1152 Response of Mammalian Cells to Pulsed Electric Fields
P_1153 Application of Response Surface Methodology to Optimal
design of a Cathode Geometry in Inertial Electrostatic Confinement Device
P_1154 Improvement of energy transfer efficiency during ozone
production using nano-seconds pulsed discharge
P_1155 Experimental Research on Silver Wires Fuse Opening Switch
driven by Dynamic Transformer Type Magnetocumulative Generator for High
Voltage Pulse Generation
P_1157 Quantum dot-based Optical Immunosensing System for
Simultaneously detecting Tumor Markers
P_1158 Rapid Start of Robust Radiation Helped by a
Non-competitive Neighbor Mode in a Gigawatts-class Magnetically
Insulated Line Oscillator
P_1159 Efficiency Enhancement by Improved Axial Power Extraction
in a Gigawatt-class Magnetically Insulated Line Oscillator
P_1160 Pulse Modulator using Solid State Switch
P_1161 Smaller Spot size Flash X-ray Generation from KALI 5000
system
P_1162 Measurement of electron energy during pulsed discharge in
atmospheric gas
P_1163 Generation of high current pulsed heavy ion beam for
application of materials processing
P_1164 Response surface methodology application for optimal
shape design of arc shield in vacuum interrupter as compact circuit
breaker of pulse generation device
P_1165 Influence of feeding gas humidity in nano-seconds pulsed
discharge based ozonizer
P_1166 Output Characteristics Comparison of Marx Generator
Composed IGBT and SI-Thyristor for IEC Neutron Source
P_1167 The compact pulse electron accelerator.
P_1168 Research of the Impedance of the Planar Diode at Use of
Explosive-Emission Cathodes from Various Materials
P_1169 Biomedical application of nanosecond electric pulse
generated underwater shock waves
P_1170 Three-electrode gas-filled controllable discharger
P_1171 Improvement of Polyphenol Extraction from Grape Skin by
Pulse Discharges under Water
P_1172 Energy transfer efficiency of nano-seconds pulsed power
generator for non-thermal plasma processing
P_1173 Effects of Pulse Voltage Stimulation on Fruit Body
Formation in Lentinula Edodes Cultivation
P_1174 Anisotropically focusing lens based sheet-like electron
beam for microfocus X-ray sources
P_1175 Portable 100kV-class Nanosecond Pulse Generator using LC
Resonance
P_1176 Physical parameters of laser-produced plasma in high
pressure fluid
P_1177 Optimum discharge conditions for smaller particles at the
Ag wire explosion in liquid media
P_1178 3-D PIC SIMULATIONS OF THE EFFECT ON ELECTRON FLOW IN THE
MITL OF Z
P_1179 X-RAY BACKLIGHTING OF DEVELOPMENTS WIRE-ARRAY Z-PINCHES
USING AN X-PINCH AND THE DENSINTY MEASUREMENT OF THE CORNAL PLASMAS
P_1180 Compact LTD Modules for Pulsed Power Generation
P_1181 Fabrication and Operation Testing of a Dual Resonance
Pulse Transformer for PFL Pulse Charging
P_1182 Characteristic evaluation of CdS cell for the portable
x-ray dosimeter instrumentation
P_1183 Characteristic of Micro-pattern Gas detector with Pixel
read-out for X-ray imaging
P_1184 Design and Operation of the Compact 600kJ Pulse Forming
Network for Electromagnetic Launch
P_1185 Introduction of recycled aggregate production system
based on pulsed discharge inside of waste concrete
P_1186 Performances of 2 ns pulsed discharge plasma
P_1187 Sheath Dynamics and Plasma Recovery in Plasma Source Ion
Implantation
P_1189 A study of the effect of salinity on pulsed arc discharge
in water
P_1190 Influence of gas compositions on NO removal using
nano-seconds pulsed discharge
P_1191 Theoretical Design and Particle Simulation of a Moderate
Energy P-band Relativistic Backward Wave Oscillator
P_1192 Results of the capillary plasma source development for
laser wakefield acceleration
P_1193 INTENSE PULSED ELECTRON BEAM: APPLICATION TO MATERIAL STUDY
P_1194 The Influence of Inter-layer Pressure on Performance of
High Energy Density Metallized Film Capacitor
P_1195 Study of the Plasma Efficiency of Dielectric Barrier
Discharges by Variation of Electrical Pulse Shape
P_1196 New developments of Lorentz Drift switches for high
current and high voltage applications
P_1197 Numerical and Experimental Investigation of Inward tube
forming by electromagnetic forming
P_1198 Fault Modes in Pulsed Power Machines
P_1199 Pulsed Power Research at AWE
P_1200 Li storage characteristics of Sn@C nanocomposite material
synthesized by electrical explosion method
P_1201 Repetitive Compact Pulsed Power Generator Using IGBTs and
Pulse Compression Circuit.
P_1202 A study on the optical lens coupled CCD based high
resolution gamma ray detector
P_1203 Dynamic Model for the Z Accelerator Vacuum Section Based
on Transmission Line Code
P_1204 Pulsed Power Systems for Electromagnetic and
Electrohydraulic Forming
P_1205 Contribution of the explosive emission cathode periphery
on the operation of aplanar electron diode
P_1206 AUTONOMOUS, REPETITIVE AND COMPACT MARX WITH ITS OWN
INTEGRATED PULSE FORMING LINE
P_1207 Big Pressure ??Small Error Bars: The Challenge to
High-Energy Density Sciences
P_1209 3D PIC Method for Modeling and Simulating the Beam
Transport System of Linear Induction Accelerator
P_1210 Controlling the Pointing Angle of a Relativistic Electron
Beam in a Weakly-Nonlinear Laser Wakefield Accelerator
P_1211 Overview of the KERI's Solid State Pulsed Power Modulator
P_1212 Novel pull-down circuit without pull down resistor for
pulsed power application.
P_1213 A simple DSSC sealing technique adopting a CO2 laser beam
excited by the 60Hz AC discharges
P_1214 Sterilization of Escherichia coli Based on Nd:YAG
Resonator with a Pulsed Xenon Flashlamp
P_1215 A Study on the Control of a CW CO2 Laser Output using
Resonance Characteristics
P_1216 The characteristics of pulsed-dc discharges in
atmospheric pressure plasmas
P_1217 Decomposition of sulfur hexafluoride by using nonthermal
plasma-assisted catalytic process
P_1218 Wall confinement technique by magnetic gradient inversion.
P_1219 Investigations on the commercial and military EMP
standards and their test requirements
P_1220 A Compact Pulse Transformer
P_1221 The Development of High Efficiency Current Source Power
Supply for Industrial Magnetron Drive
P_1222 Beam Dynamics in a Long-Pulse Linear Induction Accelerator
P_1223 Pulsed Power System of the 20 MeV Proton Linac*
P_1224 Primary Analysis of Switches Trigger Based on the
Secondary Induced Voltage of LTD
P_1225 Design of 100kV and 2kHz Repetition-Rate High-voltage
Pulsed Power Supply
P_1226 Development of the PEFP 100MeV Proton Linear Accelerator *
P_1227 Power Supply Development of Compact Simulator for Beam
Dynamics Study
P_1228 Numerical Study for Electron Beam Dynamics in Compact
Simulator for Heavy Ion Inertial Fusion
P_1229 10kJ/s,100kV Capacitor Charging Power Supply Using Full
-Bridge Parallel-Resonant Inverter
P_1230 An overview of laser-driven particle-beam studies at AWE
Aldermaston.
P_1231 Multi-MA Reflex Triode Research
P_1232 Induction Acceleration in Synchrotrons and Cyclotrons
P_1233 Spectral Diagnosis of Acetone Species in Argon Plasma Jet
with Intermediate Frequency at Atmospheric Pressure
P_1234 High Energy Photon Generation using Laser Accelerated
Electron Beams
P_1235 Enhanced proton beam generation from an aulminum-coated
plastic target irradiated by an ultra-intense laser pulse
P_1236 Development of a Table-top Terahertz Free Electron Laser
based on a compact Microtron
P_1237 Application of electromagnetic pulse power to the
consolidation of nano-sized powders
P_1238 Thermal conductivity enhancement of ethylene glycol-based
nanofluid containing oxide nanoparticles
P_1239 Preparation of carbon encapsulated Ag nanoparticles for
dispersion in La0.6Sr0.4Co0.3Fe0.7O3-灌
P_1240 Laser Induced Electron, Ions and Fast Neutrons from a
Deuterated Polystyrene Target
P_1241 Electical Properties of Inductively Coupled Electrodeless
Lamp
P_1242 Digitalized Sub-nanosecond Full Solid State Pulser
P_1243 Portable Spark Gap pulser with Monopolar or Bipolar
Waveforms
P_1253 R&D Status of High Current Accelerators at IFP
P_1255 Coupling and Interaction of High-Power Electromagnetic
(HPEM) Radiation
P_1256 On Pulsed High-Voltage Insulation Design
P_1257 Electromagnetic modeling of high power microwave coupling
mechanism into large structures (review)